On Windows 11, you can create a new partition on a hard drive using different tools. In this guide, you will learn the steps for using the Settings app, Disk Management, Command Prompt, PowerShell, and the installation setup. A partition (also referred to as a volume) describes the logical section on the drive that is formatted and configured with a file system (such as NTFS or FAT32) and drive letter to store files. Usually, you can have multiple partitions on the hard drive that will appear on File Explorer as different drives.
You can create as many partitions as you need, but there are limitations depending on the partition style. For example, if the device uses the Master Boot Record (MBR) partition style, you can only have up to four “primary” partitions. Only one of them can be set as “active,” usually, this is the partition where the operating system is installed.
Also, partition number four will be converted automatically into an “extended” partition. An extended partition can’t store data but allows you to have additional “logical” partitions. This workaround enables the system to have more than four partitions. Technically, inside an extended partition, you don’t have a limit on the number of partitions that you can create.
If the hard drive is initialized as GUID Partition Table (GPT), you can create as many primary partitions as needed since the limitation is 128 partitions. (With these instructions, you can also convert a drive from MBR to GPT.)
This guide will teach you the different ways to create a new partition on a hard drive on Windows 11. If you have to delete a partition, use these instructions.
Create a partition on Windows 11 from Settings appCreate a partition on Windows 11 from Disk ManagementCreate a partition on Windows 11 from Command PromptCreate a partition on Windows 11 from PowerShellCreate a partition on Windows 11 from SetupCreate a partition on Windows 11 from Settings appTo create a partition from unpartitioned space on Windows 11, use these steps:
Open Settings on Windows 11.
Click on Storage.
Click on Advanced storage settings under the “Storage Management” section.
Click the “Disks & volumes” setting.
Select the SSD or HDD storage to create a new partition.
Select the “Unallocated” space and click the Create volume button.
Confirm a label for the drive in the “Label” setting.
Select the drive letter to make it available on File Explorer in the “Drive Letter” setting.
Select the NTFS option in the “File System” setting.
Confirm the size of the partition in the “Size” setting.
Click the Advanced setting.
Check the “Perform a quick format” option.
Click the Format option.
Once you complete the steps, the partition will be created, formatted, and ready to store files.
If you want to create another partition on a drive that already has a partition taking the entire storage space, you first need to shrink the partition to create unallocated space to set up another partition.
Create a partition on Windows 11 from Disk ManagementTo create a hard drive partition from the Disk Management tool, use these steps:
Open Start.
Search for Create and format hard disk partitions and click the top result to open the Disk Management app.
Right-click the drive with the “Unallocated” and select the “New Simple Volume” option.
Quick note: If the drive already has a partition, right-click it and select the “Delete Volume” option. However, this process will delete the data currently on the drive. As a result, I recommend that the partition files be backed up before proceeding.
Click the Next button.
Confirm the size of the partition in the “Size” setting.
Click the Next button.
Select the “Assign the following driver” option and choose the letter for the new partition.
Click the Next button.
Select the “Format this volume with the following settings” option.
Select the NTFS option in the “File System” setting.
Confirm the drive’s name in the “Volume label” setting.
Check the “Perform a quick format” option.
Click the Next button.
Click the Finish button.
After you complete the steps, Disk Management will create and format the partition on the SSD or HDD storage on Windows 11.
Create a partition on Windows 11 from Command PromptTo create a partition from Command Prompt, use these steps:
Open Start.
Search for Command Prompt, right-click the top result, and click on Run as an administrator.
Type the following command to launch the diskpart tool and press Enter:
diskpartType the following command to view the disks on your computer and press Enter:
list diskType the following command to select the drive to create a partition and press Enter:
select disk 0In the command, change “0” for the number of the disk to create a partition.
Type the following command to create a primary partition and press Enter:
create partition primaryQuick tip: You can specify the amount of space to assign for the new partition using the size=x (where x is the amount of space in megabytes) to the command I showed you above. The command would look something like this: create partition primary size=1000
(Optional) Type the following command to list the volumes on your computer (RAW means that the volume doesn’t have a file system) and press Enter:
list volumeType the following command to format the partition with the NTFS file system and press Enter:
format fs=ntfs quickType the following commands to assign a drive letter and press Enter:
assign letter=fQuick tip: If you use the assign command, the drive will get a letter automatically, but if you use the assign letter=x command, you need to specify a letter that is not currently in use. In the command, also remember to change “2” for the number of the volume you want to assign a letter.Once you complete the steps, Command Prompt will create and format the partition on the hard drive.
Create a partition on Windows 11 from PowerShellTo create a partition with PowerShell commands, use these steps:
Open Start.
Search for PowerShell, right-click the result, and select the Run as administrator option.
Type the following command to identify the hard drive to partition and format and press Enter:
Get-Disk(Optional) Type the following command to erase the entire drive and press Enter:
Get-Disk 7 | Clear-Disk -RemoveDataIn the command, change “7” to the disk number of the drive to use. If you specify the number incorrectly, you could wipe out the wrong drive, causing data loss. This step is optional in case you want to create a partition on a drive with an existing partition.
Type “Y” to confirm that you want to wipe the specified drive, and press Enter.
Type the following command to create a partition using the NTFS file system, assign a name for the partition, and press Enter:
New-Partition -DiskNumber 7 -UseMaximumSize | Format-Volume -FileSystem NTFS -NewFileSystemLabel myUSBflashIn the command, change “7” with the disk number of the storage and change “myUSBflash” with the name you want to use for the new partition.
Type the following command to assign a drive letter to the storage and press Enter:
Get-Partition -DiskNumber 7 | Set-Partition -NewDriveLetter F
In the command, make sure to change “1” with the disk number of the drive you’re partitioning and change “F” with the letter to assign to the storage.
After you complete the steps, the partition should appear as a new drive and be accessible through File Explorer.
Create a partition on Windows 11 from SetupTo create a partition during the Windows 11 installation, use these steps:
Start your PC with a Windows 11 USB install media.
Important: To boot your computer using a USB flash drive, you may need to modify the UEFI firmware settings. This typically involves pressing one of the function keys (F1, F2, F3, F10, or F12), the “ESC,” or the “Delete” key. For precise instructions, refer to your manufacturer’s support website. It’s crucial to note that this process will erase all data on the hard drive. Therefore, it’s highly recommended to create a backup of your files before proceeding.Press any key to begin.
Click the Next button.
Click the Install now button.
Type the product key to activate Windows 11, or click the Skip button if this is a reinstallation.
Check the “I accept the license terms” option.
Click the Next button.
Choose the edition of Windows 11 to install if you skipped the product key.
Click the Next button.
Select the “Custom: Install Windows only (advanced)” option.
Select each partition on the drive and click the Delete button.
Select the “Drive 0 Unallocated Space” item.
Click the New button.
Choose the amount of space (in megabytes) for the partition that will hold Windows 11 and apps.
Click the Apply button.
Click the OK button. (Alongside the custom partition, Windows 11 will also create the additional partitions automatically required to install and run the system.)
(Optional) Select the “Drive 0 Unallocated Space” item.
Click the New button to create additional partitions with the remaining space (as necessary).
Select the “Drive 0 Partition 4 (Primary)” item from the list.
Click the Next button.
Once you complete the steps, the setup process will initiate a fresh installation of Windows 11 on the newly created partition. After the installation is complete, you will be required to go through the out-of-box experience (OOBE) to create an account and finalize the setup process.
Although the steps to use the “Disks & volumes” settings are exclusively for Windows 11, you can still refer to these instructions if you’re using Windows 10, 8.1, 7, and older if you use the Disk Mamanagent tool, Command Prompt, and PowerShell.
Update July 31, 2024: This guide has been updated to ensure accuracy and reflect changes to the process.
I hope you found this site helpful. Before you move on, I wanted to ask if you would consider supporting my work. As an independent site, producing content takes a lot of work and dedication, and because of those using adblockers and AI, advertising revenue is falling fast. Unlike many other sites, there is no paywall blocking readers here, so you can see why your help is needed. With your support, I can continue the work I love doing. Thank you.
Donate About the author
Mauro HuculakMauro Huculak is a Windows How-To Expert who started Pureinfotech in 2010 as an independent online publication. He has also been a Windows Central contributor for nearly a decade. Mauro has over 15 years of experience writing comprehensive guides and creating professional videos about Windows and software, including Android and Linux. Before becoming a technology writer, he was an IT administrator for seven years. In total, Mauro has over 21 years of combined experience in technology. Throughout his career, he achieved different professional certifications from Microsoft (MSCA), Cisco (CCNP), VMware (VCP), and CompTIA (A+ and Network+), and he has been recognized as a Microsoft MVP for many years. You can follow him on X (Twitter),YouTube, LinkedIn and About.me. Email him at [email protected].
Why You Can Trust Pureinfotech
The author combines expert insights with user-centric guidance, rigorously researching and testing to ensure you receive trustworthy, easy-to-follow tech guides. Review the publishing process.
Related Stories How to mount a drive as a folder on WindowsHow to connect any Bluetooth device on Windows 11Difficulty level: AdvancedHow-ToWindows 11Windows Help